Descripción
Horsley SLOPE PLATE CAROUSEL
The Horsley slope plate device is constructed of articulating contoured carriages forming a continuous rotating sloped surface. The unit can be automatically fed
via belt conveyor(s) and is operated continuously at 90 feet per minute. The usable width of the conveying surface is 59 inches.
The overall outside device dimension is 16 ft. 0 in. This rugged, heavy duty device is built and installed to provide a life that exceeds industry standards.
Frame and Track
The frame consists of standard modular assemblies bolted together to form a support structure and guide for the carriage assemblies. The construction is of
structural steel, supported on center, providing a rigid, level surface for the tracks and frame.
Deck
The claim unit deck can be either a flat or beveled design depending on the aesthetic appeal desired. In either case, the top of the deck is constructed with 3/4 in. fire retardant plywood supported by either a wooden or steel platform. The deck has a lockable access hatch for easy maintenance.
Carriage Assembly
Each modular carriage assembly consists of a steel support for the upper and lower polyurethane guide wheels and the stainless steel carriage plate. Each module is connected at its lower end for a continuous drive linkage.
Drive Assembly
The Drive assembly consists of a heavy-duty, roller chain driven by a motor through a gear reducer and drive sprocket. The roller chain engages three modular pallet assemblies at all times. Electrical Controls The Slope plate devices are furnished with either soft-start or VFD’s for smooth start-ups, start warning, emergency stops and overload protection.
Trim
For installation in public claim area, the outer peripheral guards and trim strips are Type 304 stainless with #4 finish. For installation in non-public sortation areas, the outer peripheral guards and trip strips are steel, finished in wear and rust-resistant powder coat paint. A 3 in. high toe space is provided at the base of the peripheral guards.